Toolhub 9524 Vacuum Test GuageUsed to check for leaks in the fuel & vacuum system via indicated pressure loss, may...

3 piece set of heavy duty 3-leg gear pullers is made from chrome plated forged steel and comes in 3", 4" and...

A heavy duty tool for the removal & installation of the rear mounting bush on the front lower wish-bone on certain...

Ratchet action piston ring compressor, durable construction with sprung steel band, complete with allen key. 150mm in...

Ratchet action piston ring compressor, durable construction with sprung steel band, complete with allen key. 100mm in...

Glow plug adaptors: 91mm M10x1, 119mm M10x1, 135mm M10x1.25, 118mm M22x1.5, 113mm M10x1, 102mm M10x1, 83mm M10x1, 64mm...

3 multi-pivoted three legged pullers, made from strong heat treated drop forged carbon steel, for removing gear wheels...

Remove and install threaded leaf spring and shackle pins on Volvo, Kenworth, and Peterbilt truck suspensions 27mm Drive...

Use with 1/2bDr. Or 25mm wrench, filter range 115-150mm. Serrated internal sides & two way operation for better...

Use with 1/2bDr. Or 22mm wrench, filter range 82-110mm. Serrated internal sides & two way operation for better grip...

Heavy Duty Oil Filter Chain Wrench - Length 520mm

Required for draining and filling coolant systems fitted to Scania trucks and buses, Scania: 340/360 Truck/Bus - 4/5...

1/2"Sq D 18 Point, 135mm, For the removal and instalation of certain oil filters found on MAN trucks eg: 18~48...

For use with the service kit for the Knorr-Bremse disc brake units for correct caliper adjustment. For SN6, SN7, SK7,...

For even installation of the Crankshaft rear oil seal, when used correctly this heavy duty tool delivers equal force on...

For installing the transmission rear oil seal evenly, when used correctly this tool delivers equal force on the...

Designed to rotate the crankshaft on Scania commercial vehicles. 1/2" Sq D

Special tool for rotating the Crankshaft for setting the engine timing on Volvo trucks. 1/2" Internal square...

For servicing the brakes on Volvo N7, N10, N12, F7, F12, F16, FH12, FH16, FL7, FL10. ERF E Series and EC Series trucks....

Fluid Stopper and Clamp Set 10 Piece. For various pipes and hoses including fuel & transmission fluid lines,...

Specially for removing the front and rear wheel shaft covers found on Volvo commercial vehicles. 115mm 1" Sq D,...

For MAN & TGA front axle lock nuts, heavy duty construction, black phosphate finish, 3/4"D/60mm Hex drive....

Transmission shaft Socket (310/320) - Scania

For removing the front hub on MAN vehicles, heavy duty construction, 100.2mm inner diameter 115x1.5mm outer diameter

Flywheel Rotating Tool 3 Gear Wheels - MAN / BENZ

Heavy duty construction, black phosphate finish, 28.5mm straight edge internal diameter x 44mm round edge internal...

Used to accurately position the crankshaft on Mercedes trucks models 400 e.g. engines OM 401, 402, 403, 407, ACTROS, as...

For pulling siezed adjusters off the self-adjusting brake systems on truck trailers and semi-trailers. Aperture...

High impact socket, for the removal of axle clamp nuts found on MAN, DAF and Mercedes Benz vehicles, 3/4"D. 56mm

High impact socket, for the removal of axle clamp nuts found on MAN, DAF and Mercedes Benz vehicles, 3/4"D. 60mm

Specifically for the SAF euro axle hub nuts , H32, H46 drive, heavy duty construction, 140mm

For Mercedes-Benz 10/13t Reduction Axle, Hypoid and Trailer Axle No 7/4. Bus 0305 G and 0405 G, Heavy duty, 3/4"D...

For stabalising various types of HGV sockets making them safer to use on high torque applications, simply insert into...

For stabalising various types of HGV sockets making them safer to use on high torque applications, simply insert into...

For stabalising various types of HGV sockets making them safer to use on high torque applications, simply insert into...

Heavy duty impact socket for the removal and refitting of axle nuts found on MAN TGA and Benz trucks, 3/4" sq D,...

For grooved lock nuts fitted to Mercedes-benz Atego rear axle on Vario 814 and MAN models. heavy duty 6 stud impact...

For grooved lock nuts fitted to Mercedes-Benz Actros rear axle and HL/HL 8 (Hypoid) axles, heavy duty 6 stud impact...

Specifically for Mercedes Benz traiker axles, 95mm 6 point, 157mm in length, use with 36mm drive heavy duty...

Specifically for Iveco Eurotech Cursor 110mm 12 point, 120mm in length, heavy duty construction, black phosphate finish.

Specifically introduced for Iveco Eurp Cargo for use with a 36mm socket or spanner, heavy duty selected steel...

Heavy duty steel construction, internal diameter 95mm straight edge to edge , 90mm oval edge to edge

BPW 6-9 ton asymmetrical nut socket for Type H,K & N axles, internal diameter 65x40mm rectangular x 60mm oval ,...

Scania 10 wheel cab third axle hub nut socket, 3/4"D 95mm 10 point, external diameter 119mm, heavy duty...

3/4" Dr. Rear Axle Damper Rod Socket 34 x 46mm - Scania

Scania rear wheel spring pin washer removal socket, 3/4" D, internal diameter 34x56mm, external diameter 74mm,...

Scania front wheel spring pin washer removal socket, 3/4" D internal diameter 28x37mm, external diameter 54mm,...

Specifically for the front hub nuts on Scania HGVB4s, Heavy duty construction, black phosphate finish, 80mm 8 point...

Specifically for rear hub nuts on Scania HGVB4s Heavy duty construction, black phosphate finish, 100mm 8 Point...

Durable set for cars and light commercial vehicles. Fast hub diameter adjustment achieved via screw action, complete...

Uses a tyre inflator to charge the turbo system, intercooler etc, shut off and pressure relief valve, supplied with 4...

Re-threading/ repair kit for 8 &10mm glow plugs in alloy cylindr heads , Durable Chrome Vanadium with Black...

Air operated tool for grinding valve seats 1/4" Air inlet, 5600rpm, maximum air pressure 90 PSI (6.3Kg/cm2), Air...

Chrome vanadium steel pliers for the removal of hard to reach glow plug connectors found on the latest generation of...

Extra Long 6 piece Diesel 3/8" Drive Glow/Spark Plug Socket Set, for easily removing hard to get to glow plugs,...

4 pc 1/2"D set, in sizes 25 ,27, 29, 30mm, Applications include Peugeot and Citroen vehicles with 2.0 Diesel...

Glow Plug Socket Set 3pcs, 8, 9, 10mm.

3/4"Dr. Impact Socket Set 6pcs, 17mm, 19mm, E18, E20, E22, E24

For the removal of the lower injector components, Bosch, Delphi, Siemens injectors

Thread sizes M8x1.0, M10x1.0, M10x1.25, M12x1.25